Please check below for install videos for your delete kit. If in doubt, please call or email us for help/advise.
Basics methods: 1) Secure on shocks - Make sure the turning of the wheel, travel path of the shock up and down do not pull or push on the kit/wires.
2) Secure on body - This may require unlatching/pulling the original magride/dcc/ads wires out from the control arm and back towards the body. In this case, the use of the hose clamps are not required, and you can make do with zip ties.
3) Using the wheel well liner - In cases where the body or shock does not allow proper fitment, you can create small holes in the wheel well liner and thread zipties through to secure the kit. We recommend having the kit behind the wheel well. Having some Plastic JB weld or silicone on the holes cut can help ensure the hole does not get bigger over time.
Audi S3 (8Y) install (Bryce Jordan Productions)
DCC or ADS delete
Magride delete
Subscribe to our emails
Be the first to know about new collections and exclusive offers.
Choosing a selection results in a full page refresh.